Convert Meters per Second to Knots
Convert Meters per Second to Knots instantly. 1 Meter per Second (m/s) equals 1.9438 Knots (kn).
Meters per Second to Knots conversion table
| Meters per Second (m/s) | Knots (kn) |
|---|---|
| 1 m/s | 1.9438 kn |
| 2 m/s | 3.8877 kn |
| 3 m/s | 5.8315 kn |
| 5 m/s | 9.7192 kn |
| 10 m/s | 19.4384 kn |
| 20 m/s | 38.8769 kn |
| 50 m/s | 97.1922 kn |
| 100 m/s | 194.3844 kn |
| 500 m/s | 971.9222 kn |
| 1,000 m/s | 1,943.84 kn |
1 Meter per Second = 1.9438 Knots · multiply Meters per Second by 1.9438
About converting Meters per Second to Knots
Meters per Second (m/s) and Knots (kn) are both units of speed, so converting between them is a single multiplication: multiply your Meters per Second figure by 1.9438. Ten Meters per Second comes to 19.4384 Knots, and a hundred works out at 194.3844 Knots.
Rule of thumb: going from Meters per Second to Knots multiplies, so the figure always grows — one Meter per Second is already 1.9438 Knots. If your answer came out smaller, you have the conversion the wrong way round.
What is a Meter per Second?
The meter per second is the SI unit of speed and the one physics actually runs on — every equation involving velocity, momentum or acceleration expects it, and acceleration itself is measured in meters per second, per second. Yet almost nobody quotes a journey in it. Drivers reach for km/h or mph, sailors and pilots for knots, and the coherent unit stays in the lab. Where it does surface publicly is in scientific wind-speed data, in sprint analysis, and generally in anything measured by instrument rather than read off a dashboard.
What is a Knot?
The knot is one nautical mile per hour, and it is the speed unit of ships and aircraft worldwide no matter what the countries underneath use on their roads. The name is entirely literal: sailors measured speed with a chip log — a weighted board on a rope with knots tied at regular intervals, thrown over the stern and paid out for a fixed time while someone counted the knots running through their hands. It survives because it pairs with the nautical mile, which is one minute of latitude, so speed and chart distance share a ruler. One warning: "knots per hour" is simply wrong. The per-hour is already inside the word.
To put both in perspective: a brisk walking pace is about 1.4 meters per second, while a cruising airliner does around 470 knots.
The converter above updates as you type, and the table lists common values for quick reference. Need the opposite direction? Use the Knots to Meters per Second converter, or browse all Speed converters.
Frequently asked questions
How many Knots are in one Meter per Second?
There are 1.9438 Knots in one Meter per Second.
How do I convert Meters per Second to Knots?
Multiply the number of Meters per Second by 1.9438. For example, 10 Meters per Second = 19.4384 Knots.
What is 100 Meters per Second in Knots?
100 Meters per Second is equal to 194.3844 Knots.
How do I convert Knots to Meters per Second?
Multiply the Knots value by 0.5144 (or divide by 1.9438).
Is this Meters per Second to Knots conversion exact?
The definition is exact — Meters per Second and Knots are both fixed against the same base by international agreement — but the decimal shown here is rounded for readability, because the true ratio does not terminate. For engineering or scientific work, carry more decimal places than this page displays.
What is a Meter per Second?
The meter per second is the SI unit of speed and the one physics actually runs on — every equation involving velocity, momentum or acceleration expects it, and acceleration itself is measured in meters per second, per second. Yet almost nobody quotes a journey in it. Drivers reach for km/h or mph, sailors and pilots for knots, and the coherent unit stays in the lab. Where it does surface publicly is in scientific wind-speed data, in sprint analysis, and generally in anything measured by instrument rather than read off a dashboard.
What is a Knot?
The knot is one nautical mile per hour, and it is the speed unit of ships and aircraft worldwide no matter what the countries underneath use on their roads. The name is entirely literal: sailors measured speed with a chip log — a weighted board on a rope with knots tied at regular intervals, thrown over the stern and paid out for a fixed time while someone counted the knots running through their hands. It survives because it pairs with the nautical mile, which is one minute of latitude, so speed and chart distance share a ruler. One warning: "knots per hour" is simply wrong. The per-hour is already inside the word.