Convert Megawatts to Foot-pounds/min
Convert Megawatts to Foot-pounds/min instantly. 1 Megawatt (MW) equals 44,253,728.97 Foot-pounds/min (ft·lb/min).
Megawatts to Foot-pounds/min conversion table
| Megawatts (MW) | Foot-pounds/min (ft·lb/min) |
|---|---|
| 1 MW | 44,253,728.97 ft·lb/min |
| 2 MW | 88,507,457.93 ft·lb/min |
| 3 MW | 132,761,186.9 ft·lb/min |
| 5 MW | 221,268,644.84 ft·lb/min |
| 10 MW | 442,537,289.67 ft·lb/min |
| 20 MW | 885,074,579.35 ft·lb/min |
| 50 MW | 2,212,686,448.37 ft·lb/min |
| 100 MW | 4,425,372,896.75 ft·lb/min |
| 500 MW | 22,126,864,483.73 ft·lb/min |
| 1,000 MW | 44,253,728,967.45 ft·lb/min |
1 Megawatt = 44,253,728.97 Foot-pounds/min · multiply Megawatts by 44,253,728.97
About converting Megawatts to Foot-pounds/min
Megawatts (MW) and Foot-pounds/min (ft·lb/min) are both units of power, so converting between them is a single multiplication: multiply your Megawatts figure by 44,253,728.97. Ten Megawatts comes to 442,537,289.67 Foot-pounds/min, and a hundred works out at 4,425,372,896.75 Foot-pounds/min.
Rule of thumb: going from Megawatts to Foot-pounds/min multiplies, so the figure always grows — one Megawatt is already 44,253,728.97 Foot-pounds/min. If your answer came out smaller, you have the conversion the wrong way round.
What is a Megawatt?
A megawatt is a million watts, and it is the unit the electricity system is discussed in. Power stations, wind farms, solar arrays, interconnectors and national demand are all quoted in megawatts, and data centres have joined them — a modern campus is described by the megawatts it draws. The number is a capacity, a maximum rate, not a quantity delivered, which is why a wind farm "rated" at 100 MW does not produce anything close to that around the clock; what it actually generated over a year is a figure in megawatt-hours. Confusing the two is the most common error in energy reporting.
What is a Foot-pound per Minute?
The foot-pound per minute is the raw ingredient horsepower was built from. It is exactly what it says: the work of lifting a pound through a foot, done once a minute. James Watt’s original estimates of what a horse could do were made in these terms, and mechanical horsepower is still formally defined as 33,000 of them — which is why horsepower converts to such an untidy number of watts. On its own the unit is now mostly a teaching device and a fixture of older American engineering texts, appearing where someone wants to show the arithmetic behind a horsepower rating rather than simply quote it.
To put both in perspective: a large wind turbine is rated at a few megawatts, while someone climbing stairs steadily works at a few thousand foot-pounds per minute.
The converter above updates as you type, and the table lists common values for quick reference. Need the opposite direction? Use the Foot-pounds/min to Megawatts converter, or browse all Power converters.
Frequently asked questions
How many Foot-pounds/min are in one Megawatt?
There are 44,253,728.97 Foot-pounds/min in one Megawatt.
How do I convert Megawatts to Foot-pounds/min?
Multiply the number of Megawatts by 44,253,728.97. For example, 10 Megawatts = 442,537,289.67 Foot-pounds/min.
What is 100 Megawatts in Foot-pounds/min?
100 Megawatts is equal to 4,425,372,896.75 Foot-pounds/min.
How do I convert Foot-pounds/min to Megawatts?
Multiply the Foot-pounds/min value by 0.0000000226 (or divide by 44,253,728.97).
Is this Megawatts to Foot-pounds/min conversion exact?
The definition is exact — Megawatts and Foot-pounds/min are both fixed against the same base by international agreement — but the decimal shown here is rounded for readability, because the true ratio does not terminate. For engineering or scientific work, carry more decimal places than this page displays.
What is a Megawatt?
A megawatt is a million watts, and it is the unit the electricity system is discussed in. Power stations, wind farms, solar arrays, interconnectors and national demand are all quoted in megawatts, and data centres have joined them — a modern campus is described by the megawatts it draws. The number is a capacity, a maximum rate, not a quantity delivered, which is why a wind farm "rated" at 100 MW does not produce anything close to that around the clock; what it actually generated over a year is a figure in megawatt-hours. Confusing the two is the most common error in energy reporting.
What is a Foot-pound per Minute?
The foot-pound per minute is the raw ingredient horsepower was built from. It is exactly what it says: the work of lifting a pound through a foot, done once a minute. James Watt’s original estimates of what a horse could do were made in these terms, and mechanical horsepower is still formally defined as 33,000 of them — which is why horsepower converts to such an untidy number of watts. On its own the unit is now mostly a teaching device and a fixture of older American engineering texts, appearing where someone wants to show the arithmetic behind a horsepower rating rather than simply quote it.