Convert Newtons to Dynes
Convert Newtons to Dynes instantly. 1 Newton (N) equals 100,000 Dynes (dyn).
Newtons to Dynes conversion table
| Newtons (N) | Dynes (dyn) |
|---|---|
| 1 N | 100,000 dyn |
| 2 N | 200,000 dyn |
| 3 N | 300,000 dyn |
| 5 N | 500,000 dyn |
| 10 N | 1,000,000 dyn |
| 20 N | 2,000,000 dyn |
| 50 N | 5,000,000 dyn |
| 100 N | 10,000,000 dyn |
| 500 N | 50,000,000 dyn |
| 1,000 N | 100,000,000 dyn |
1 Newton = 100,000 Dynes · multiply Newtons by 100,000
About converting Newtons to Dynes
Newtons (N) and Dynes (dyn) are both units of force, so converting between them is a single multiplication: multiply your Newtons figure by 100,000. Ten Newtons comes to 1,000,000 Dynes, and a hundred works out at 10,000,000 Dynes.
Rule of thumb: going from Newtons to Dynes multiplies, so the figure always grows — one Newton is already 100,000 Dynes. If your answer came out smaller, you have the conversion the wrong way round.
What is a Newton?
The newton is the SI unit of force, and it is defined with unusual clarity: the force that accelerates one kilogram at one metre per second squared. There is nothing arbitrary in it and no historical artefact — it falls straight out of the kilogram, the metre and the second. It is named after Isaac Newton, whose second law is the sentence the definition is built from. In practice it is a small unit; holding an apple in your palm takes roughly one newton, which is a pleasing coincidence given the story. That smallness is why structural work runs in kilonewtons.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.
To put both in perspective: holding a small apple takes about one newton, while a milligram of anything weighs about one dyne.
The converter above updates as you type, and the table lists common values for quick reference. Need the opposite direction? Use the Dynes to Newtons converter, or browse all Force converters.
Frequently asked questions
How many Dynes are in one Newton?
There are 100,000 Dynes in one Newton.
How do I convert Newtons to Dynes?
Multiply the number of Newtons by 100,000. For example, 10 Newtons = 1,000,000 Dynes.
What is 100 Newtons in Dynes?
100 Newtons is equal to 10,000,000 Dynes.
How do I convert Dynes to Newtons?
Multiply the Dynes value by 0.00001 (or divide by 100,000).
Is this Newtons to Dynes conversion exact?
The definition is exact — Newtons and Dynes are both fixed against the same base by international agreement — but the decimal shown here is rounded for readability, because the true ratio does not terminate. For engineering or scientific work, carry more decimal places than this page displays.
What is a Newton?
The newton is the SI unit of force, and it is defined with unusual clarity: the force that accelerates one kilogram at one metre per second squared. There is nothing arbitrary in it and no historical artefact — it falls straight out of the kilogram, the metre and the second. It is named after Isaac Newton, whose second law is the sentence the definition is built from. In practice it is a small unit; holding an apple in your palm takes roughly one newton, which is a pleasing coincidence given the story. That smallness is why structural work runs in kilonewtons.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.