Convert Dynes to Ounce-force
Convert Dynes to Ounce-force instantly. 1 Dyne (dyn) equals 0.00003597 Ounce-force (ozf).
Dynes to Ounce-force conversion table
| Dynes (dyn) | Ounce-force (ozf) |
|---|---|
| 1 dyn | 0.00003597 ozf |
| 2 dyn | 0.00007194 ozf |
| 3 dyn | 0.0001079 ozf |
| 5 dyn | 0.0001798 ozf |
| 10 dyn | 0.0003597 ozf |
| 20 dyn | 0.0007194 ozf |
| 50 dyn | 0.001798 ozf |
| 100 dyn | 0.003597 ozf |
| 500 dyn | 0.01798 ozf |
| 1,000 dyn | 0.03597 ozf |
1 Dyne = 0.00003597 Ounce-force · multiply Dynes by 0.00003597
About converting Dynes to Ounce-force
Dynes (dyn) and Ounce-force (ozf) are both units of force, so converting between them is a single multiplication: multiply your Dynes figure by 0.00003597. Ten Dynes comes to 0.0003597 Ounce-force, and a hundred works out at 0.003597 Ounce-force.
Rule of thumb: going from Dynes to Ounce-force divides, so the figure always shrinks — it takes about 27,801.39 Dynes to make a single Ounce-force. If your answer came out bigger, you have the conversion the wrong way round.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.
What is an Ounce-force?
The ounce-force is the pound-force scaled down: the force standard gravity exerts on one ounce of mass. It exists because a great deal of engineering deals in small forces, and "a fraction of a pound" is an unhelpful way to say them. American component data sheets are where it lives — the operating force of a microswitch or push-button, spring tensions, and the torque of small motors, which is routinely specified in ounce-inches. Everywhere else the same measurements are made in newtons, so most people outside US component engineering never meet it.
To put both in perspective: a milligram of anything weighs about one dyne, while pressing a keyboard key takes roughly 2 ounce-force.
The converter above updates as you type, and the table lists common values for quick reference. Need the opposite direction? Use the Ounce-force to Dynes converter, or browse all Force converters.
Frequently asked questions
How many Ounce-force are in one Dyne?
There are 0.00003597 Ounce-force in one Dyne.
How do I convert Dynes to Ounce-force?
Multiply the number of Dynes by 0.00003597. For example, 10 Dynes = 0.0003597 Ounce-force.
What is 100 Dynes in Ounce-force?
100 Dynes is equal to 0.003597 Ounce-force.
How do I convert Ounce-force to Dynes?
Multiply the Ounce-force value by 27,801.39 (or divide by 0.00003597).
Is this Dynes to Ounce-force conversion exact?
The definition is exact — Dynes and Ounce-force are both fixed against the same base by international agreement — but the decimal shown here is rounded for readability, because the true ratio does not terminate. For engineering or scientific work, carry more decimal places than this page displays.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.
What is an Ounce-force?
The ounce-force is the pound-force scaled down: the force standard gravity exerts on one ounce of mass. It exists because a great deal of engineering deals in small forces, and "a fraction of a pound" is an unhelpful way to say them. American component data sheets are where it lives — the operating force of a microswitch or push-button, spring tensions, and the torque of small motors, which is routinely specified in ounce-inches. Everywhere else the same measurements are made in newtons, so most people outside US component engineering never meet it.