Convert Ounce-force to Dynes
Convert Ounce-force to Dynes instantly. 1 Ounce-force (ozf) equals 27,801.39 Dynes (dyn).
Ounce-force to Dynes conversion table
| Ounce-force (ozf) | Dynes (dyn) |
|---|---|
| 1 ozf | 27,801.39 dyn |
| 2 ozf | 55,602.77 dyn |
| 3 ozf | 83,404.16 dyn |
| 5 ozf | 139,006.93 dyn |
| 10 ozf | 278,013.85 dyn |
| 20 ozf | 556,027.7 dyn |
| 50 ozf | 1,390,069.26 dyn |
| 100 ozf | 2,780,138.51 dyn |
| 500 ozf | 13,900,692.55 dyn |
| 1,000 ozf | 27,801,385.1 dyn |
1 Ounce-force = 27,801.39 Dynes · multiply Ounce-force by 27,801.39
About converting Ounce-force to Dynes
Ounce-force (ozf) and Dynes (dyn) are both units of force, so converting between them is a single multiplication: multiply your Ounce-force figure by 27,801.39. Ten Ounce-force comes to 278,013.85 Dynes, and a hundred works out at 2,780,138.51 Dynes.
Rule of thumb: going from Ounce-force to Dynes multiplies, so the figure always grows — one Ounce-force is already 27,801.39 Dynes. If your answer came out smaller, you have the conversion the wrong way round.
What is an Ounce-force?
The ounce-force is the pound-force scaled down: the force standard gravity exerts on one ounce of mass. It exists because a great deal of engineering deals in small forces, and "a fraction of a pound" is an unhelpful way to say them. American component data sheets are where it lives — the operating force of a microswitch or push-button, spring tensions, and the torque of small motors, which is routinely specified in ounce-inches. Everywhere else the same measurements are made in newtons, so most people outside US component engineering never meet it.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.
To put both in perspective: pressing a keyboard key takes roughly 2 ounce-force, while a milligram of anything weighs about one dyne.
The converter above updates as you type, and the table lists common values for quick reference. Need the opposite direction? Use the Dynes to Ounce-force converter, or browse all Force converters.
Frequently asked questions
How many Dynes are in one Ounce-force?
There are 27,801.39 Dynes in one Ounce-force.
How do I convert Ounce-force to Dynes?
Multiply the number of Ounce-force by 27,801.39. For example, 10 Ounce-force = 278,013.85 Dynes.
What is 100 Ounce-force in Dynes?
100 Ounce-force is equal to 2,780,138.51 Dynes.
How do I convert Dynes to Ounce-force?
Multiply the Dynes value by 0.00003597 (or divide by 27,801.39).
Is this Ounce-force to Dynes conversion exact?
The definition is exact — Ounce-force and Dynes are both fixed against the same base by international agreement — but the decimal shown here is rounded for readability, because the true ratio does not terminate. For engineering or scientific work, carry more decimal places than this page displays.
What is an Ounce-force?
The ounce-force is the pound-force scaled down: the force standard gravity exerts on one ounce of mass. It exists because a great deal of engineering deals in small forces, and "a fraction of a pound" is an unhelpful way to say them. American component data sheets are where it lives — the operating force of a microswitch or push-button, spring tensions, and the torque of small motors, which is routinely specified in ounce-inches. Everywhere else the same measurements are made in newtons, so most people outside US component engineering never meet it.
What is a Dyne?
The dyne is a fossil of the CGS system, the centimetre-gram-second rival to the metric scheme that became SI. It is the force that accelerates one gram at one centimetre per second squared, which makes it a genuinely tiny amount of force — roughly the weight of a single milligram. CGS lost, and most of its units went down with it, but the dyne hangs on in one durable niche: surface tension and surface energy are still quoted in dynes per centimetre, so anyone specifying inks, coatings, adhesives or plasma treatment for plastics reads dyne figures daily.